Particle size distribution and characteristics of heavy metals in road-deposited sediments from Beijing Olympic Park

Due to rapid urbanization and industrialization, heavy metals in road-deposited sediments(RDSs) of parks are emitted into the terrestrial, atmospheric, and water environment, and have a severe impact on residents' and tourists' health. To identify the distribution and characteristic of heavy metals in RDS and to assess the road environmental quality in Chinese parks, samples were collected from Beijing Olympic Park in the present study. The results indicated that particles with small grain size(150 μm) were the dominant fraction. The length of dry period was one of the main factors affecting the particle size distribution, as indicated by the variation of size fraction with the increase of dry days. The amount of heavy metal(i.e., Cu, Zn, Pb and Cd) content was the largest in particles with small size(150 μm) among all samples. Specifically, the percentage of Cu, Zn, Pb and Cd in these particles was 74.7%, 55.5%, 56.6% and 71.3%, respectively.Heavy metals adsorbed in sediments may mainly be contributed by road traffic emissions. The contamination levels of Pb and Cd were higher than Cu and Zn on the basis of the mean heavy metal contents. Specifically, the geoaccumulation index(I geo) decreased in the order:CdPbCuZn. This study analyzed the mobility of heavy metals in sediments using partial sequential extraction with the Tessier procedure. The results revealed that the apparent mobility and potential metal bioavailability of heavy metals in the sediments, based on the exchangeable and carbonate fractions, decreased in the order: CdZn≈PbCu.     

Development and case study of a science-based software platform to support policy making on air quality

This article describes the development and implementations of a novel software platform that supports real-time, science-based policy making on air quality through a user-friendly interface. The software, RSM-VAT, uses a response surface modeling (RSM) methodology and serves as a visualization and analysis tool (VAT) for three-dimensional air quality data obtained by atmospheric models. The software features a number of powerful and intuitive data visualization functions for illustrating the complex nonlinear relationship between emission reductions and air quality benefits. The case study of contiguous U.S. demonstrates that the enhanced RSM-VAT is capable of reproducing the air quality model results with Normalized Mean Bias < 2% and assisting in air quality policy making in near real time.     

紫外消解流动注射分光光度法测定地表水中总氮的实验研究

应用荷兰Skalar公司的SAN”连续流动注射分析仪测定地表水中的总氮,建立测定地表水中总氮的流动注射分析法.结果显示该方法分析速度快,分析速率可达32个/小时,仪器测定浓度与峰高响应值相关性很高,相关系数为0.9996,线性范围0.0 mg/L ～5.00 mg/L,方法检出限为0.03 mg/L,精密度RSD小于4％,均满足国家实验质量标准要求.紫外消解流动注射分光光度法测定地表水总氮具有分析速度快、准确度高、干扰少,适合大批量的地表水分析.     

淀浦河近十年水质评价及变化趋势研究

针对区域地表水污染特征,采用综合污染指数法,评价了淀浦河中上游段2005年-2014年间水质达标情况,计算了主要污染物的污染负荷,运用季节性肯达尔趋势检验分析了淀浦河中上游段水质变化趋势.结果表明,近十年来淀浦河中上游段水质均未达到规划水质要求,但总体水质呈改善趋势,水质以轻度污染为主,各主要污染物中,氨氮的污染负荷最大,总磷次之,呈现以氨氮和总磷为主的富营养化污染特征,研究结果为淀浦河的水质改善和水环境的污染防治等工作提供了重要依据.     

Modeling and optimization of turning duplex stainless steels

The attractive combination of high mechanical strength, good corrosion resistance and relatively low cost has contributed to making duplex stainless steels (DSSs) one of the fastest growing groups of stainless steels. As the importance of DSSs is increasing, practical information about their successful machining is expected to be crucial. To address this industrial need, standard EN 1.4462 and super EN 1.4410 DSSs are machined under constant cutting speed multi-pass facing operations. A systematic approach which employs different modeling and optimization tools under a three phase investigation scheme has been adopted. In phase I, the effect of design variables such as cutting parameters, cutting fluids and axial length of cuts are investigated using the D-Optimal method. The mathematical models for performance characteristics such as; percentage increase in radial cutting force (%F_r), effective cutting power (P_e), maximum tool flank wear (VB_max) and chip volume ratio (R) are developed using response surface methodology (RSM). The adequacy of derived models for each cutting scenario is checked using analysis of variance (ANOVA). Parametric meta-heuristic optimization using Cuckoo search (CS) algorithm is then performed to determine the optimum design variable set for each performance. In the phase II, comprehensive experiment-based production cost and production rate models are developed. To overcome the conflict between the desire of minimizing the production cost and maximizing the production rate, compromise solutions are suggested using Technique for Order Preference by Similarity to Ideal Solution (TOPSIS). The alternatives are ranked according to their relative closeness to the ideal solution. In the phase III, expert systems based on fuzzy rule modeling approach are adopted to derive measures of machining operational sustainability called operational sustainability index (OSI). Artificial neural network (ANN) based models are developed to study the effect of design variables on computed OSIs. Cuckoo search neural network systems (CSNNS) are finally utilized to constrainedly optimize the cutting process per each cutting scenario. The most appropriate cutting setup to ensure successful turning of standard EN 1.4462 and super EN 1.4410 for each scenario is selected in accordance with conditions which give the maximum OSI.     

普光气田地面集输工程防雷技术研究

结合普光气田地面集输工程防雷工作的开展,就如何解决山区土壤电阻率高和电力系统防雷,如何提高电力、通讯、SCADA和RTU等自控系统的可靠性、稳定性等方面进行了分析、总结,并根据工作实际提出了建议。     

电子元器件表面化学防护效果的测定研究

目的研究电子元器件表面化学防护的方法。方法应用选择性涂覆设备进行研究并优化工艺条件,选择丙烯酸清漆和稀释剂的体积混合比例从1∶0.2到1∶1进行实验,在100 mm/s的喷涂速度下,喷涂印制板的过程在0.5 min内完成,喷涂的相对标准偏差不超过±0.005 mm。结果涂层厚度可控制在25~75μm的范围内,符合国际标准ICP-CC-830的要求,涂层具有较好的流平性,无气泡、针孔和絮状物,无雾化等。结论这种方法可以成功地应用于印制板上电子元器件表面的化学防护。该方法具有涂覆准确性高,有毒稀释剂消耗量低,涂覆效果好,经济环保等的特点。     

中国地表水环境质量标准监测体系现状研究及完善建议

中国地表水环境质量标准监测体系历经30余年,已初步形成一套基本成熟的地表水环境质量监测体系,但随着环境保护工作的不断推进和监测技术的进步,监测体系的诸多问题也凸显.结合中国《地表水环境质量标准》（GB 3838-2002）,对中国地表水水质的监测方法、技术、指标等方面进行了系统的归纳与分析,提出了相应的建议,即规范项目参数的描述、筛选优化控制项目、建立多层次、实用的控制指标监测方法体系、完善控制项目QC指标体系、制订专门地表水监测技术规范.     

24孔板发酵法测定地表水和废水中粪大肠菌群的研究

对地表水和废水中粪大肠菌群的多管发酵法进行了改进。改进了初发酵方法,采用24孔板代替试管进行初发酵,复发酵方法保持不变。对环境中采集的23个污水样本采用24孔板初发酵法与多管发酵法进行比较,结果表明,两种方法相关性良好,两者在结果上无统计学意义的差别。采用改进的24孔板法进行初发酵有效节约了培养基、缩短了实验准备时间,简化了操作步骤,尤其适用于大批量的、污染严重的地表水和废水中粪大肠菌群的检测。     

我国《地表水环境质量标准》历次修订概要及启示

针对目前我国地表水环境质量标准制制修订现状,从水域功能划分、标准项目、标准限值等主要内容及发展历程进行回顾梳理;从健康风险管理角度出发,总结经验并对我国《地表水环境质量标准》制修订工作提出建议。